Talk:Pipette

From WikiProjectMed
Jump to navigation Jump to search

Pipettor

In the section discussing positive displacement pipettes, the term "pipettor" is used twice. While a common industry term, I do not believe "pipettor" is an actual word at all. Are colloquialisms acceptable article language? HemlockBrock

Doesn't the picture show what are technically micropipettes rather than pipettes? -- Миборовский U|T|C|M|E|Chugoku Banzai! 01:27, 30 January 2006 (UTC)[reply]

Pipette vs. Micropipette

It is accurate to call them both pipettes. The larger one is a macropipette and the smaller one is a micropipette. Both are pipettes so the description is accurate. I will edit the page to point out this distinction.

I added the above-mentioned change, and added some additional accuracy-granted changes. I wrote the article.

As per the top comment regarding the word "pipettor". You are correct, it is not a 'real' word. It is thought to have been created by Richard Vaughton, MD of Biohit Limited as a way of describing electronic pipettors to differentiate them from mechanical pipettes.

Is there a reference to this etymology? At any rate, the word "pipette" seems to have an etymology going back to the mid-19th century. "Pipettor" should be described as a common synonym for pipette. —Preceding unsigned comment added by 140.139.35.250 (talk) 19:47, 4 November 2007 (UTC)[reply]

[Cleaned up but not otherwise altered -- Jo3sampl (talk) 23:26, 2 December 2013 (UTC)][reply]

Clean up

The transfer pipette link redirects to the pasteur pipette article - are they one and the same? If so, there shouldn't be two links.

Just a note that

was removed due to the link not being publicly available anymore. — Preceding unsigned comment added by Willmwade (talk • contribs) 15:51, 7 February 2012 (UTC)[reply]

pronunciation

Is it pronounced pipe-ette or is it pip-ette? 

 The Wiki-dictionary link shows it as 'pai'-'pet', which agrees with

my personal work experience. —Preceding unsigned comment added by 140.139.35.250 (talk) 19:49, 4 November 2007 (UTC)[reply]

The Oxford English Dictionary gives two pronunciations: one which looks more or less pipe-ette which is labeled as U.S., and one which looks like pip-ette which is labeled Brit. --Itub (talk) 09:23, 15 September 2008 (UTC)[reply]

Pipe-pette is a very US pronunciation. I've never heard it used in 20 years of lab work in Australia and UK. Even by Americans. — Preceding unsigned comment added by 129.78.32.24 (talk) 00:35, 20 June 2011 (UTC)[reply]

Pip-ette is correct. Pipe-ette is the American (i.e. incorrect) pronunciation.

Assessment

Still requires a picture of a glass pipette, and more emphasis there since the autopipette is based on this. I will remove some of the pictures because it seems like a catalog than an article. --Rifleman 82 17:12, 6 December 2006 (UTC)[reply]


comments

very nice article. HOwever....some pipets work by pos displacement; no source for air displacement with dispo tips more accurate then glass (eg, constriction pipets), the section on glass shows lack of historical knowledge (constrictions again, were quite common up to the 80s, ) no mention revolution of gilson pipetman, don't understant the "electric pipet" at the end - certainly a pipet aid or similar with a serological pipet is widely used, and therefore worthy of note, no mention of adoption of roboticized pipet stations, and finally, would be worth noting special tips like the ziptop, phynexus, etc

selection of pipettes picture

Is it just me or does anyone find the pipettes picture to be very cluttered? I think all of the types of pipettes are worthy of inclusion in the article, but the way they are organized in the picture seems too crowded and obscures some of the pipettes. Can we go to pictures of individual types of pipettes (micro-, multi-channel, electric)? Or maybe lay everything flat on a table and take a picture? Biomedeng 00:35, 8 February 2007 (UTC)[reply]

semantics of operation

Minor nitpick--description of holding pipette at 90 degree angle is vague. It should state that the pipette should be held nearly completely vertical, or perpendicular to the liquid horizontal. Company literature I've read usually recommends that pipette be held within a few degrees of vertical, as that is the condition under which the pipette is calibrated. Nice article! Additional details on the parts and repair of a pipette would be informative.

"Eppendorf" Pipettes

In the description of different pipettes (Volumetric, Graduated etc.) reference is made to "Eppendorf" pipettes. Eppendorf do indeed make a selection of the type of pipette described, but that's just a brand, not an actual type. Eppendorfs aren't even the most common or most likely to become genericized, Gilsons are almost synonymous with this type of pipette. I'm replacing the reference to Eppendorf with the actual type of pipette being described. 82.10.70.8 (talk) 03:57, 25 November 2008 (UTC)[reply]

Google says: "Gilson pipettes" = 242.000 hits, "Eppendorf pipettes" = 1.660.000 hits. Could be regional preferences.92.194.125.155 (talk) 17:53, 11 February 2012 (UTC)[reply]

terrible article

as a scientist who uses pipettes on an hourly basis, and as someone who has worked for companies that make them, just a quick scan turns up some errors, eg "Piston-driven air displacement pipettes Single-Channel Pipettes designed to handle 1-5ml and 100-1000µl with locking system Main article: Air displacement pipette These pipettes are the most precise and accurate type of pipette" is simply wrong, it is well known in the indutry that air displacement pipets ar less accurate, paritcularly for viscous liquids, then pos displacement pipets. (i know, my spelling sucks). and the two sections below read like badly copied marketing lit; heat from your hand is a minor, minor factor, and I have never seen anyone train themselves to use ambidexterous pipettting and electronic ones are heavy - they are more tiring sometimes then manual ones, and a lot more exspensve, and paradoxically, often harder to use

Heat from the operator's hand is absorbed through the handle of the instrument and transferred to the metallic components inside. If the pipette is operated continuously for a prolonged period of time this heat buildup becomes significant, causing the internal components to expand and changing the interplay between components. This reduces the consistency, accuracy, and repeatability of the instrument. The volume dispensed is dependent on the sizes of the piston and the springs that cause its travel. As these change in size the volume dispensed changes also. This effect is more pronounced in low-volume instruments. Additionally, the expansion of a metallic component that interacts with a non-metallic one that does not expand as readily in the presence of heat may cause the instrument to seem to stick, hang up, or react more slowly. Pipettes with thin handles are particularly susceptible to this phenomenon. Plumper handles are both more ergonomic and less likely to suffer from heat transfer problems. The best technique for maximum accuracy is to employ multiple pipettes and rotate them often, storing them between uses in a stand that holds them vertically.

Operator fatigue is an often-overlooked but crucial component when seeking maximal accuracy and repeatability. Repetitive motions cause stress in human joints and muscles. Even a well-trained and experienced operator will see a decrease in accuracy and repeatability as length of time on the job increases. It is for this reason that pipette calibration service providers that are dedicated to excellence limit the number of pipettes that can be calibrated by an individual technician to a maximum daily number. Each pipette, and each customer, deserves a high level of care in the treatment of the instrument. Additionally, some dedicated professionals train themselves to pipette ambidextrously, allowing them to reduce arm and finger strain by alternating hands. Another solution is choosing an electronic pipettor which significantly reduces hand fatigue. Once the operating button is touched the pipettor operates always the same way producing user independent accuracy and precision.

Cinnamon colbert (talk) 16:35, 30 March 2010 (UTC)[reply]

Changed the formatting above for readability. Adrian J. Hunter(talk•contribs) 11:35, 3 April 2010 (UTC)[reply]
Thank you for your comments. I don't think many people are watchlisting this article; you're welcome to be bold and make whatever improvements you can. Don't worry about spelling or the like – if you can provide accurate information, myself or another contributor can make any necessary copyedits. Adrian J. Hunter(talk•contribs) 11:35, 3 April 2010 (UTC)[reply]

Graduated Pipettes

Regarding the Mohr and serological pipettes, I believe the difference is not a 0 mark but a mark for the final volume of the pipette. They both start at 0, but the Mohr pipette has graduations from 0 to let's say 10ml, with dead space after that. The corresponding serological pipette would have graduations from 0 to 9 point something, and the tip volume is included to make up difference for 10ml. Silverpeakwines (talk) 07:11, 2 November 2011 (UTC)[reply]

History?

Who invented the eyedropper/pipette? When? Thanks -- Jo3sampl (talk) 23:30, 2 December 2013 (UTC)[reply]

Andrew Alliance?

Everything about the Andrew Alliance robot on all of Wikipedia appears to be added by their marketing department. It doesn't seem to be anthropomorphic - though captioned as such, and it is not the first and far from the most common type of liquid handling robot. Yet a link to their home page and an oddly captioned picture of their product seems to be the representative image and reference on this and other pages. — Preceding unsigned comment added by 98.118.126.98 (talk) 17:11, 4 January 2017 (UTC)[reply]

Posture and Injuries

This reads like a how-to book. It may also be a copyright infringement. I don't believe that it has a place in the article.JSR (talk) 16:56, 28 March 2017 (UTC)[reply]

A Commons file used on this page has been nominated for deletion

The following Wikimedia Commons file used on this page has been nominated for deletion:

Participate in the deletion discussion at the nomination page. —Community Tech bot (talk) 17:37, 2 August 2019 (UTC)[reply]

The P1000 pipette

Wikipedia currently claims that P1000 has a range of 200–1000. However had, if you search for P1000, many vendors state that it has a range of 100-1000, which is actually also my experience too. It may be that it is recommended to not use it in the range of 100-200, that may be; but I believe even then the table is wrong at wikipedia. It should state 100-1000 rather than 200, IMO. 2A02:8388:1641:8380:8920:7EEB:D50A:6466 (talk) 15:38, 22 September 2019 (UTC)[reply]

Add mouth pipetting to history section

Mouth pipetting is an outdated technique that was used in many Western countries prior to the invention of the modern pipette. I was trying to look up when the transition from mouth pipetting to more modern alternatives occurred in the United States, and I was disappointed to find no mention of the obsolete (and, as you can imagine, very dangerous) practice, at all. I have never created a full article section before (I mostly just do grammatical edits), so I would be very grateful if someone coordinated with me to help add this very real and very gross part of pipetting history to this article. Emilyofjane (talk) 16:58, 5 January 2024 (UTC)[reply]

Retrieved from "https://mdwiki.org/wiki/Talk:Pipette"