Wood's glass

From WikiProjectMed
Jump to navigation Jump to search
Two "black-light" ultraviolet fluorescent tubes. The glass envelopes illustrate the dark blue color of Wood's glass, although these modern tubes actually use another optical filtering material.

Wood's glass is an optical filter glass invented in 1903 by American physicist Robert Williams Wood (1868–1955), which allows ultraviolet and infrared light to pass through, while blocking most visible light.[1]

History

Wood's glass was developed as a light filter used in communications during World War I.[2][3] The glass filter worked both in infrared daylight communication and ultraviolet night communications by removing the visible components of a light beam, leaving only the "invisible radiation" as a signal beam. Wood's glass was commonly used to form the envelope for fluorescent and incandescent ultraviolet bulbs ("black lights"). In recent years, due to its disadvantages, other filter materials have largely replaced it.[4]

Composition

Wood's glass is special barium-sodium-silicate glass incorporating about 9% nickel oxide. It is a very deep violet-blue glass, opaque to all visible light rays except longest red and shortest violet. It is quite transparent in the violet/ultraviolet in a band between 320 and 400 nanometres with a peak at 365 nanometres, and a fairly broad range of infrared and the longest, least visible red wavelengths.[citation needed]

Properties and uses

Wood's glass has lower mechanical strength and higher thermal expansion than commonly used glasses, making it more vulnerable to thermal shocks and mechanical damage.[citation needed]

The nickel and barium oxides are also chemically reactive, with tendency to slowly form a layer of hydroxides and carbonates in contact with atmospheric moisture and carbon dioxide.

The susceptibility to thermal shock makes manufacture of hermetically sealed glass bulbs difficult and costly. Therefore, most contemporary "black-light" bulbs are made of structurally more suitable glass with only a layer of a UV-filtering enamel on its surface;[citation needed] such bulbs, however, pass much more visible light, appearing brighter to the eye. Due to manufacturing difficulties, Wood's glass is now more commonly used in standalone flat or dome-shaped filters, instead of being the material of the light bulb.

With prolonged exposure to ultraviolet radiation, Wood's glass undergoes solarization, gradually losing transparency for UV.[citation needed]

Photographic filters for ultraviolet photography, notably the Kodak Wratten 18A and 18B, are based on Wood's glass.[5][citation needed]

Health effects

Bulbs made of Wood's glass are potentially hazardous in comparison with those made of enameled glass, since the reduced visible light output may cause observers to be exposed to unsafe levels of UV, because the source appears dim. The low output of black lights is not considered sufficient to cause DNA damage or cellular mutations, but excessive exposure to UV can cause temporary or permanent damage to the eye.

See also

References

  1. ^ Williams, Robin; Gigi Williams (2002). "Wood, Professor Robert Williams". Pioneers of Invisible Radiation Photography. RMIT Online University, Melbourne, Australia. Retrieved January 16, 2013.
  2. ^ "Invisible Signals". Proceedings of the United States Naval Institute. 45 (10). Annapolis, Maryland: U.S. Naval Institute: 1794–1796. October 1919. Retrieved 27 March 2013.
  3. ^ Rodgers, John, ed. (1920). "Secret signaling by light rays". Kline Geology Laboratory. American Journal of Science. 49. New Haven: Yale University: 214–216. Retrieved 27 March 2013.
  4. ^ "...a BLB [black light bulb] has a thin coating of a visible wavelength (VIS) filter generally applied to the inner wall of the bulb" from "Part I: Lighting and its effects on color-grading diamonds" (PPT). AGA Task Force on Lighting and Color-Grading. Accredited Gemologists Association. 3 February 2010. Retrieved 27 March 2013. See also the 2009 report: "Part I: Lighting and its effects on color-grading diamonds" (PPT). AGA Task Force on Lighting and Color-Grading. Accredited Gemologists Association. 4 February 2009. Retrieved 20 April 2018.
  5. ^ "Reflected Ultraviolet Photography". Medical and Scientific Photography. RMIT University.

Further reading

  • Wood, R. W. (1919). "Secret communications concerning light rays". Journal of Physiology. 5e (IX).
  • Margarot, J.; Deveze, P. (1925). "Aspect de quelques dermatoses lumiere ultraparaviolette. Note preliminaire". Bulletin de la Société des sciences médicales et biologiques de Montpellier (in French). 6: 375–378.
  • Williams, Robin, Prof.; Williams, Gigi. "Prof. Robert Williams Wood". Pioneers of invisible radiation photography. Archived from the original on 2011-04-07.{{cite web}}: CS1 maint: multiple names: authors list (link)