Talk:Australian stock saddle

From WikiProjectMed
Jump to navigation Jump to search

Sandbox

The traditional Australian stock saddle was designed for security and comfort in the saddle, no matter how harsh the conditions. While having stylistic roots from the English saddle in the design of the seat, panels, fenders, and stirrups, it has a much deeper seat, higher cantle, and flared pommels (sometimes called Poleys) in the front to create a very secure saddle for riders who ride in rough conditions or spend long hours on a horse.

Initially the stock saddle was a park style saddle with low set knee rolls and short flaps. This style of saddle did not suit the rugged Australian terrain and did little protect the rider’s legs from sweat.

Jack Wieneke later developed a saddle with large high set knee and thigh pads and included longer flaps. The cantle and pommel were also raised giving a deeper seat. These saddles were popular for a number of years, but the design became too extreme and lost favour to more conservative styles.

Noted saddle makers were George Schneider, Bob Thurlow, Syd Hill, “The Tenterfield Saddler”, George Woolnough and nowadays Warren Newcombe, John Davis and Bernie Brady, whose handmade saddle won at a Sydney RAS Show for hand crafted [[leather] objects.

During the early days of buckjumping in Australian rodeos, riders rode in a modified stock saddle using a crupper instead of a flank girth. Ladies Stock Saddles were traditionally made with a pigskin seat and with older-style, longer knee and thigh pads.

Modern styles range from traditional models through to a newer "half breed" that incorporates the independent swinging fender of the western saddle with the traditional Australian tree and seat style. There are also "cross breed" saddles that combine other western saddle elements, such as a saddle horn or a western cantle design, with traditional Australian elements, such as the pommel swells and deep seat. These saddles are becoming very popular with equine competitors.

Ref: Outback magazine Aug/Sep 2007 – pp 28-44

http://www.jamessaddlery.com.au/history.htm The Saddlers' and Harness Makers' Association of Australia http://australiansaddlers.com.au/ — Preceding unsigned comment added by 115.70.33.6 (talk) 07:16, 15 November 2012 (UTC)[reply]

Say, could you provide some info on the following:

The Australian Stock Saddle is measured from the first row of stitching to the inside and middle of the cantle. This is measured in inches and a common measurement used is 15.5" for an average fit. Getting out to 18" is considered a very large saddle and children are usually around 13-14". The tree for the hairlined poley stock saddle is normally wood and steel. It's a shaped wooden framework (traditionally coachwood or NZ beech) made out of timber that consists of four major parts, being: the head (pommel), the cantle board and the two side bars (left/right). These are morticed and glued together and then the whole tree is reinforced with strips of steel approximately an inch wide under the cantle board and side bars, and a forged heavy steel gullet plate under the pommel area, with a one inch strip of lighter steel shaped over the pommel and the spring bars and crupper bar are all riveted into place together using steel rivets. To fit the horse the pommel of the saddle has to be the correct angle to suit the horse's conformation, and as the saddler makes the saddle he has to be aware of the shape of the horse and he makes and stuffs the panels accordingly (underneath lining). To fit the rider the saddle tree has to be the appropriate length and then the saddler adjusts the kneepad position somewhat to suit the individual's style of riding and size as he is making the saddle. [User: Tgifford] — Preceding unsigned comment added by Neicyqld (talkcontribs) 01:51, 22 January 2021 (UTC)[reply]

Sizing...what sizes are typical for men, women, children? How is the saddle measured? What kind of materials is the tree made of? The swells? The underside? How does one tell a good saddle from a cheap knockoff? Where are the best saddles made? Are saddles made in other nations ever of decent quality (i.e. India, etc...)...How should a saddle fit the horse and rider (see English saddle for ideas...) —Preceding unsigned comment added by Montanabw (talkcontribs) 04:00, 21 October 2007 (UTC)[reply]

I feel that the selection of a saddle is a personal preference and with so many new styles and materials used I am reluctant to comment. Personally I would have a traditional style saddle hand made for me if I was to do much riding. They are quite expensive and the cost may not be justified for the ocassional rider. I do not like all the layers of leather under me that many newer saddles use. The cheap Indian imports certainly would not be my choice on young horses or rugged mountain rides etc.

Below are a selection of URLs that will answer most of your other queries. http://www.aussiesaddle.com/why_aussie_saddle.htm

http://www.jamessaddlery.com.au/tech.htm

http://www.jamessaddlery.com.au/guarantee.htm

http://www.downunderweb.com/wither.htm Cgoodwin 04:07, 23 October 2007 (UTC)[reply]

Fair use rationale for Image:Snowyriver-aus-both-movies.jpg

Image:Snowyriver-aus-both-movies.jpg is being used on this article. I notice the image page specifies that the image is being used under fair use but there is no explanation or rationale as to why its use in this Wikipedia article constitutes fair use. In addition to the boilerplate fair use template, you must also write out on the image description page a specific explanation or rationale for why using this image in each article is consistent with fair use.

Please go to the image description page and edit it to include a fair use rationale. Using one of the templates at Wikipedia:Fair use rationale guideline is an easy way to insure that your image is in compliance with Wikipedia policy, but remember that you must complete the template. Do not simply insert a blank template on an image page.

If there is other fair use media, consider checking that you have specified the fair use rationale on the other images used on this page. Note that any fair use images lacking such an explanation can be deleted one week after being tagged, as described on criteria for speedy deletion. If you have any questions please ask them at the Media copyright questions page. Thank you.

BetacommandBot (talk) 04:29, 21 January 2008 (UTC)[reply]

Poley

Cg, the "poley" thing is something used in the US to describe almost all Aussie saddles. (see here as example). I have no clue why, so will toss the "poley" reference in the article, but I would be interested in anyone who can get to the bottom of where this term originated. Montanabw(talk) 03:44, 6 February 2010 (UTC)[reply]

External links modified

Hello fellow Wikipedians,

I have just modified one external link on Australian Stock Saddle. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}).

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 18 January 2022).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 00:08, 22 October 2016 (UTC)[reply]