Sintered polyethylene

From WikiProjectMed
Jump to navigation Jump to search

Sintered polyethylene is a polyethylene powder that is formed into a solid without melting it. It can be produced using heat, pressure, or selective laser sintering.[1] It has applications as a coating on pipes and skis, and as a filter medium.

Applications

Pipes

Sintered polyethylene is applied to steel pipes to resist corrosion. Pipes are heated and then polyethylene powder coated, either electrostatically or through immersion.[2][3]

Skis

Sintered polyethylene was introduced as a coating on skis in 1962. It is more durable, and less dense than solid, extruded polyethylene. Its porous structure allows the ski to absorb wax.[4][5]

Filter medium

Sinter plate filter elements were developed in Germany[6] during the years of 1981 and 1982. These rigid filter elements are used in dust collectors and will produce clean gas values of 0.1 to 1.0 mg/m3 with emissions of 0.001 pounds per hour with a maximum of 0.0004 gr/ft3, even with dusts of D50 < 1 µm. The EPA [1] defines high efficiency as removal of 0 to 5.0 µm particulates. [2]

The filter element matrix consists of molded sintered polyethylene (PE) with a reinforced mounting header. An additional PTFE-coating gets into the pores of the PE-basic body and forms a micro-porous, non-sticking surface resulting in surface-loaded filtration.[7] This combined material is chemical resistant and unaffected by slight moisture. The rigid sinter plate filters have an extremely stable structure and can be recycled. The average useful life of a sinter plate filter element can exceed 10 years.

Sinter plate PE filter elements are environmentally compatible. They produce no toxic waste in themselves and can be washed off and reused. There is no contamination of material from filter fibers like fabric and cartridge media elements. Dust collector#Fabric Collectors

The rigidity of the matrix results in no wear from abrasive material. Cleaning is accomplished by on-line, low-pressure reverse air jet-pulse.[7] Standard elements will handle temperatures up to 158 °F with improved elements designed for up to 230 °F

The separation efficiency exceeds that required by the BIA-certificate regarding dust classification M.

References

  1. ^ Bai, J.; Zhang, B.; Song, J.; Bi, G.; Wang, P.; Wei, J. (2016). "The effect of processing conditions on the mechanical properties of polyethylene produced by selective laser sintering". Polymer Testing. 52: 89–93. doi:10.1016/j.polymertesting.2016.04.004.
  2. ^ Tim Burstall (1997). Bulk Water Pipelines. Thomas Telford. p. 18. ISBN 9780727726094.
  3. ^ Mikael Braestrup; Jan B. Andersen; Lars Wahl Andersen; Mads B. Bryndum; Niels-J Rishøj Nielsen (2009). Design and Installation of Marine Pipelines. Wiley. p. 185. ISBN 9781405148740.
  4. ^ Seth Masia (March 2004). "Milestone and Detours in Ski Design". Skiing Heritage: 21.
  5. ^ George Thomas (1992). Performance Skiing; Training and Techniques to Make You a Better Alpine Skier. Stackpole Books. p. 169. ISBN 9780811730266.
  6. ^ G.E. Klinzing; F. Rizk; R. Marcus; L.S. Leung (2013). Pneumatic Conveying of Solids; A Theoretical and Practical Approach. Springer Netherlands. p. 420. ISBN 9789401589819.
  7. ^ a b Huang, Mei; Yan, Cuiping; He, Chunhong; Tang, Cuiying; Yang, Fei; Li, Peng (2021). "The relationship between peak pressure and parameters of pulse-jet cleaning in a sintered plastic filter". Journal of the Air & Waste Management Association. 71 (9): 1055–1066. doi:10.1080/10962247.2020.1860157.
Stub icon

This material-related article is a stub. You can help Wikipedia by expanding it.

Retrieved from "https://mdwiki.org/wiki/Sintered_polyethylene"