The purported copyright violation copies text from uniqa.dental/articles/full-arch-dental-implants-protocols-and-techniques (Copyvios report); as such, this page has been listed on the copyright problems page.
Unless the copyright status of the text of this page or section is clarified and determined to be compatible with Wikipedia's content license, the problematic text and revisions or the entire page may be deleted one week after the time of its listing (i.e. after 15:27, 30 May 2024 (UTC)). Until then, this page will be hidden from search engine results until the copyright issue is resolved.
What can I do to resolve the issue?
If you hold the copyright to this text, you can license it in a manner that allows its use on Wikipedia.
To confirm your permission, you can either display a notice to this effect at the site of original publication or send an e-mail from an address associated with the original publication to permissions-enwikimedia.org or a postal letter to the Wikimedia Foundation. These messages must explicitly permit use under CC BY-SA and the GFDL. See Wikipedia:Donating copyrighted materials.
Note that articles on Wikipedia must be written from a neutral point of view and must be verifiable in published third-party sources; consider whether, copyright issues aside, your text is appropriate for inclusion in Wikipedia.
Otherwise, you may rewrite this page without copyright-infringing material. Your rewrite should be placed on this page, where it will be available for an administrator or clerk to review it at the end of the listing period. Follow this link to create the temporary subpage. Please mention the rewrite upon completion on this article's discussion page.
Simply modifying copyrighted text is not sufficient to avoid copyright infringement—if the original copyright violation cannot be cleanly removed or the article reverted to a prior version, it is best to write the article from scratch. (See Wikipedia:Close paraphrasing.)
For license compliance, any content used from the original article must be properly attributed; if you use content from the original, please leave a note at the top of your rewrite saying as much. You may duplicate non-infringing text that you had contributed yourself.
It is always a good idea, if rewriting, to identify the point where the copyrighted content was imported to Wikipedia and to check to make sure that the contributor did not add content imported from other sources. When closing investigations, clerks and administrators may find other copyright problems than the one identified. If this material is in the proposed rewrite and cannot be easily removed, the rewrite may not be usable.
Add the following to the bottom of Wikipedia:Copyright problems/2024 May 23: * {{subst:article-cv|Full arch restoration}} from uniqa.dental/articles/full-arch-dental-implants-protocols-and-techniques. ~~~~
Add the following template to the talk page of the contributor of the material: {{subst:Nothanks-web|pg=Full arch restoration|url=uniqa.dental/articles/full-arch-dental-implants-protocols-and-techniques}} ~~~~
Place {{copyvio/bottom}} at the end of the portion you want to blank. If nominating the entire page, please place this template at the top of the page, set the "fullpage" parameter to "yes", and place {{copyvio/bottom}} at the very end or the article.
Full arch restoration in dentistry refers to the comprehensive reconstruction or rehabilitation of an entire dental arch, which can include all teeth in the upper or lower jaw.[1][2] This procedure is also known as full mouth reconstruction or full mouth rehabilitation.[3][4][5]
Overview
Full arch restoration involves creating a single prosthesis to replace 10 to 14 teeth. Typically, the front areas of the jaw maintain more bone volume suitable for implants, whereas the back regions often suffer greater bone loss. This sequence occurs due to the typical loss of molars initially, followed by premolars, while the front teeth tend to remain intact for the longest duration. As time passes, there is a noticeable reduction in both the height and width of the alveolar ridge following tooth loss.[6]
Indications
The indications for full-arch restoration include:
Complete edentulism: the condition of having all teeth missing in one or both jaws.
Teeth that are irreparably damaged or loose.
Severe periodontitis or periodontal disease, particularly when the outlook for treatment is bleak due to the scarcity of remaining teeth.
Bone tissue loss in the lateral areas allows for the positioning of angled implants.
Narrow alveolar ridge, which may require guided bone regeneration surgery.
Types
Types of implant supported restorations
The two main types of full-arch restorations in dentistry are fixed implant-supported restorations and removable implant-supported overdentures.
Prosthetics can be temporary or permanent.
Temporary prosthetics
Temporary prosthesis on multi-unit abutments
Temporary prosthetics are essential in implant-supported full-arch restorations.
Temporary prosthetics in full arch restoration refer to provisional dental appliances that are used to replace missing teeth during the healing phase after implant surgery. These temporary prosthetics are designed to provide immediate aesthetics and function while the final permanent prosthesis is being fabricated. They are typically worn for a period of several months until the implants have fully integrated with the jawbone and the final restoration can be placed. Temporary prosthetics help maintain the patient's appearance and ability to eat and speak comfortably during the healing process.
Permanent prosthetics
Permanent prosthetics in full arch restoration are the final, long-term dental appliances used to replace missing teeth and restore function and aesthetics in patients with extensive tooth loss. These prosthetics are custom-designed and fabricated to fit precisely onto dental implants that have integrated with the jawbone. Permanent prosthetics can include fixed dental bridges, implant-supported dentures, or full-arch implant-supported prostheses. They are typically made from durable materials such as ceramic, zirconia, or metal alloys, and are designed to closely resemble natural teeth in both appearance and function.[7]
Dentures that are removable and supported by a bar
Acrylic prosthesis attached with locks
Approaches for securing a prosthesis onto a bar:
Locking mechanism: The dental prosthesis is secured to a metal structure that includes retaining components referred to as "males." These males, integrated into the framework, engage with corresponding "matrices" that snap onto the bar's "locks." The bar is permanently fixed and not intended for removal or conditional removal. Locks vary in design and configuration.
Ball Attachments: They consist of a spherical component (the ball) that fits into a corresponding socket or housing on the prosthesis.
Locator-Type Cylindrical Connections: type of attachment system featuring individual abutments with cylindrical connections and dedicated interface designs for securing prostheses onto a bar.
The choice of full-arch restoration depends on factors such as the patient's oral health, bone structure, budget, and treatment preferences. A thorough evaluation by a dentist or prosthodontist is necessary to determine the most suitable treatment plan for each individual case.
Implants and abutments
Internal Hex Implants
Implants featuring a prominent threading pattern are especially important when being inserted into a socket that was recently vacated by a extracted tooth. This approach ensures initial stability, relying on 3–4 mm of the implant's tip securely fitting into the bone tissue. The size and length of these implants are chosen according to the specific clinical scenario, taking into account the patient's anatomical characteristics and the state of the bone tissue.
Multi-unit abutments for screw fixation of prosthesis
Multi-unit abutments are chosen according to the soft tissue height above the bone during implantation.
Healing cap for multi unit abutment
Healing caps are specifically made for multi-unit abutments. These caps are unique because they are meant to be connected to a multi-unit abutment, which is placed into the implant right after implantation. Afterward, the healing cap is fixed onto the abutment.
Temporary Sleeve for Multi-Unit Abutment
Temporary denture sleeves on multi-unit abutments. During the first few months after implantation, patients receive a lightweight temporary prosthesis aimed at minimizing stress on the implants. These prosthetic devices are anchored using specific sleeves inserted into them, which are then tailored to the required height by grinding at the screw shaft exit points. Afterward, the screw shafts are covered with a composite material.
Sleeves designed for multi-unit abutments cater to permanent dentures, offering various modifications to suit different needs. The initial variant is 12 mm long and is altered at the screw shaft exits. The second variant comes with a yellow coating and stands at a height of 4 mm, making it perfect for scenarios where the sleeve is positioned close to the outer edge of the prosthesis.
Scan abutments. First, multi-unit abutments are placed to provide support for the prosthesis. Next, scanning caps are mounted onto these abutments, after which the specialist uses an intraoral scanner to capture images. This procedure produces digital files that precisely outline the positions of both implants and abutments, allowing them to be seamlessly integrated with existing CBCT images.
Digital analogues. Digital equivalents are utilized for both individual implants and those with multi-unit abutments during the fabrication of physical jaw models. To achieve accurate prosthesis development and fitting, a 3D-printed representation of the patient's jaw is employed. Within this model, replicas of the implants are placed to mimic the exact positions of the real implants within the patient's mouth.
Stages
Preparation
Axial, sagittal and coronal plane of CBCT and 3D reconstruction.
The initial stage commences with the acquisition of 3D representations of the patient's jaw by merging digital data from CBCT scans with optical data gathered from an intraoral scanner. Various software platforms excel in handling this data, spanning from converting CBCT images into 3D files to creating prosthetic models. Leading software choices for these processes include Dental Wings, Shape 3D and Exocad. Additionally, documenting the soft tissue state and existing teeth is crucial, accomplished through photographic records.
Scan with scan markersA scan of the gums
Following this, the expert needs to strategize the placement of implants and generate a preliminary model of the dentition. It's vital to position the screw shaft exits on the inner aspect of the prosthesis. Precise digital representations of implants, screws, and abutments are critical at this juncture to guarantee their accurate positioning within the digital jaw model.
Once the suitable implants have been chosen and their positions planned, the next step involves crafting a navigation template, often referred to as a surgical template. The template plays a crucial role in ensuring the precise placement of implants according to the digital blueprint and at the proper angles.
Ney Articulator with Bridge - NCP 3280
The surgical or navigation template, together with the provisional prosthesis, undergoes thorough assessment and any required adjustments using either a plaster model or a 3D-printed representation of the jaw. Both models, encompassing the restorations, need to be validated within an articulator to confirm their precision.
Installation
The procedure adapts according to the initial clinical state. For patients with a prolonged absence of teeth, the process typically follows a straightforward approach.
Creating a navigation template entails making small incisions in the soft tissue at the implant sites instead of pulling back the gums, aiming to maintain gum volume.
The predetermined quantity of implants is positioned utilizing the navigation template.
Following implant placement, the template is removed.
After attaching the provisional prosthesis to multi-unit abutments and sealing the screw shafts with composite material, the postoperative phase commences.
In order to fabricate the permanent prosthesis, it is essential to gather up-to-date data utilizing an intraoral scanner. This procedure involves several stages:
The temporary dental replacement is taken out, and images are taken without the replacement and scanning caps to assess the condition of the soft tissue
After affixing scanning caps onto the multi-unit abutments, a survey is conducted to assess the angles of both the abutments and the central axes of the screw shafts.
The gathered data is subsequently converted into 3D files, forming the foundation for creating a permanent prosthesis. This process is supported by a selection of software packages tailored to the preferences of the specialist.
Elaborate physical replicas of the jaws are meticulously fabricated for the purpose of testing and fitting.
The entire assembly is thoroughly assessed on a physical articulator. Upon ensuring proper alignment of all elements, the prosthesis is readied for installation. Coloration of the prosthetic gum part is performed, and any necessary color adjustments to the crowns are made using a ceramic layer.
After the finalization, the fully completed prosthesis is attentively placed onto the patient. Then, the patient attends regular preventive check-ups and maintenance sessions.
Advantages and disadvantages
The benefits include:
Improved Patient Convenience: Patients receive new teeth immediately following surgery, resulting in shorter recovery times and decreased risk of complications.
Preservation of Bone: The use of minimal implants and multi-unit abutments reduces the necessity for bone augmentation procedures such as sinus lifts, facilitating efficient and rapid osseointegration.
Seamless Adaptation: Patients readily adjust to their new prosthesis.
Contraindications:
Unregulated diabetes mellitus characterized by elevated and fluctuating blood sugar levels.[8]
Diseases related to the cardiovascular and endocrine systems.[12]
Risks
Rehabilitation treatments involving full arch dental implants may encounter complications and failures. In general, complications may be related to the patient's systemic compromise, increased functional demand, surgical technique, post-operative care, design and type of prosthesis, etc. The overall success rate for dental implants is between 90 and 100% according to the study.[13] Common prosthetic issues following the installation of an implant-supported prosthesis include mucositis, loosening or breakage of the abutment screw or prosthetic parts, and fracture of the acrylic or porcelain structure. Although most complications resolve favorably in follow-up appointments, it is essential to establish an adequate surgical and prosthetic management protocol to achieve predictable and successful long-term results.[14][15]
^Kanmani, A.; Narasimman, M.; Venkatakrishnan, C. J.; Rathinavel, Pandian M.; Tamizhesai, B.; Navinbharathy, M. (2023). "Zirconia for full arch restorations". Journal of the Indian Dental Association Tamil Nadu. 14: 11. doi:10.26634/jidat.14.1.20245.
