Saponification

From WikiProjectMed
(Redirected from Saponified)
Jump to navigation Jump to search

Saponification is a process of cleaving esters into carboxylate salts and alcohols by the action of aqueous alkali. Typically aqueous sodium hydroxide solutions are used.[1][2] It is an important type of alkaline hydrolysis. When the carboxylate is long chain, its salt is called a soap. The saponification of ethyl acetate gives sodium acetate and ethanol:

C2H5O2CCH3 + NaOH → C2H5OH + NaO2CCH3

Saponification of fats

Vegetable oils and animal fats are the traditional materials that are saponified. These greasy materials, triesters called triglycerides, are usually mixtures derived from diverse fatty acids. In the traditional saponification, the triglyceride is treated with lye, which cleaves the ester bonds, releasing fatty acid salts (soaps) and glycerol. In one simplified version, the saponification of stearin gives sodium stearate.

C3H5(O2C(CH2)16CH3)3 + 3 NaOH → C3H5(OH)3 + 3 NaO2C(CH2)16CH3

This process is the main industrial method for producing glycerol (C3H5(OH)3).

Some soap-makers leave the glycerol in the soap. Others precipitate the soap by salting it out with sodium chloride.

Skeletal formula of stearin, a triglyceride that is converted by saponification with sodium hydroxide into glycerol and sodium stearate.

Fat in a corpse converts into adipocere, often called "grave wax". This process is more common where the amount of fatty tissue is high and the agents of decomposition are absent or only minutely present.

Saponification value

The saponification value is the amount of base required to saponify a fat sample.[3] Soap makers formulate their recipes with a small deficit of lye to account for the unknown deviation of saponification value between their oil batch and laboratory averages.

Mechanism of basic hydrolysis

The hydroxide anion adds to the carbonyl group of the ester. The immediate product is called an orthoester.

Saponification part I
Saponification part I

Expulsion of the alkoxide generates a carboxylic acid:

Saponification part II
Saponification part II

The alkoxide ion is a strong base so the proton is transferred from the carboxylic acid to the alkoxide ion, creating an alcohol:

saponification part III
saponification part III

In a classic laboratory procedure, the triglyceride trimyristin is obtained by extracting it from nutmeg with diethyl ether. Saponification to the soap sodium myristate takes place using NaOH in water. Treating the soap with hydrochloric acid gives myristic acid.[4]

Saponification of fatty acids

The reaction of fatty acids with base is the other main method of saponification. In this case, the reaction involves neutralization of the carboxylic acid. The neutralization method is used to produce industrial soaps such as those derived from magnesium, the transition metals, and aluminium. This method is ideal for producing soaps that are derived from a single fatty acid, which leads to soaps with predictable physical properties, as required by many engineering applications.

Applications

Hard and soft soaps

Depending on the nature of the alkali used in their production, soaps have distinct properties. Sodium hydroxide (NaOH) produces "hard" soaps; hard soaps can also be used in water containing Mg, Cl, and Ca salts.[5] By contrast, potassium soaps (derived using KOH) are "soft" soaps. The fatty acid source also affects the soap's melting point. Most early hard soaps were manufactured using animal fats and KOH extracted from wood ash; these were broadly solid. However, the majority of modern soaps are manufactured from polyunsaturated triglycerides such as vegetable oils. As in the triglycerides they are formed from[6] the salts of these acids have weaker inter-molecular forces and thus lower melting points.

Lithium soaps

Lithium 12-hydroxystearate and other lithium-based fatty acids are important constituents of lubricating greases. In lithium-based greases, lithium carboxylates are thickeners. "Complex soaps" are also common, these being combinations of more than one acid salt, such as azelaic or acetic acid.[7]

Fire extinguishers

Fires involving cooking fats and oils (classified as class K (US) or F (Australia/Europe/Asia)) burn hotter than most flammable liquids, rendering a standard class B extinguisher ineffective. Such fires should be extinguished with a wet chemical extinguisher. Extinguishers of this type are designed to extinguish cooking fats and oils through saponification. The extinguishing agent rapidly converts the burning substance to a non-combustible soap.

Oil paints

Detail of Madame X (Madame Pierre Gautreau), John Singer Sargent, 1884, showing saponification in the black dress.

Saponification can occur in oil paintings over time, causing visible damage and deformation. Oil paints are composed of pigment molecules suspended in an oil-binding medium. Heavy metal salts are often used as pigment molecules, such as in lead white, red lead, and zinc white.[8] If those heavy metal salts react with free fatty acids in the oil medium, metal soaps may form in a paint layer that can then migrate outward to the painting's surface.[9]: 12–19 

Saponification in oil paintings was described as early as 1912.[10]: 151  It is believed to be widespread, having been observed in many works dating from the fifteenth through the twentieth centuries; works of different geographic origin; and works painted on various supports, such as canvas, paper, wood, and copper. Chemical analysis may reveal saponification occurring in a painting's deeper layers before any signs are visible on the surface, even in paintings centuries old.[9]: 16 

The saponified regions may deform the painting's surface through the formation of visible lumps or protrusions that can scatter light. These soap lumps may be prominent only on certain regions of the painting rather than throughout. In John Singer Sargent's famous Portrait of Madame X, for example, the lumps only appear on the blackest areas, which may be because of the artist's use of more medium in those areas to compensate for the tendency of black pigments to soak it up.[9]: 12–13, 15  The process can also form chalky white deposits on a painting's surface, a deformation often described as "blooming" or "efflorescence", and may also contribute to the increased transparency of certain paint layers within an oil painting over time.[9]: 16, 19 

Saponification does not occur in all oil paintings and many details are unresolved.[9]: 19  At present, retouching is the only known restoration method.

See also

References

  1. ^ "Saponification | chemical reaction". Encyclopedia Britannica. Retrieved 2021-05-23.
  2. ^ Smith, Michael B.; March, Jerry (2007), Advanced Organic Chemistry: Reactions, Mechanisms, and Structure (6th ed.), New York: Wiley-Interscience, ISBN 978-0-471-72091-1
  3. ^ "Quality Laboratory Oil Examination Procedures and Practices". American Oil Chemists' Society. Archived from the original on 25 December 2012. Retrieved 17 December 2012.
  4. ^ G. D. Beal (1926). "Myristic Acid". Organic Syntheses. 6: 66. doi:10.15227/orgsyn.006.0066.
  5. ^ "How Saponification Makes Soap". ThoughtCo. Retrieved 2023-07-05.
  6. ^ "Double bonds and hydrogenation". GCSE Bitesize. BBC. Archived from the original on 2018-08-18. Retrieved 2017-03-10.
  7. ^ Bartels, Thorsten; Bock, Wolfgang; Braun, Jürgen; Busch, Christian; Buss, Wolfgang; Dresel, Wilfried; Freiler, Carmen; Harperscheid, Manfred; Heckler, Rolf-Peter; Hörner, Dietrich; Kubicki, Franz; Lingg, Georg; Losch, Achim; Luther, Rolf; Mang, Theo; Noll, Siegfried; Omeis, Jürgen (2003). "Lubricants and Lubrication". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a15_423. ISBN 3-527-30673-0.
  8. ^ Groen, Karin (2003). "Pigment". Grove Art Online. Oxford University Press. doi:10.1093/gao/9781884446054.article.T067586. ISBN 978-1-884446-05-4. Retrieved January 16, 2018.
  9. ^ a b c d e Centeno, Silvia A.; Mahon, Dorothy (Summer 2009). Leona, Marco (ed.). "The Chemistry of Aging in Oil Paintings: Metal Soaps and Visual Changes". The Metropolitan Museum of Art Bulletin. 67 (1). Metropolitan Museum of Art: 12–19. JSTOR 40588562. PDF of full issue.
  10. ^ Fleury, Paul (1912). "Manufacture and Different Treatments of White Zinc, its Modifications and Improvements". The Preparation and Uses of White Zinc Paints (1st ed.). London: Scott, Greenwood & Son. pp. 122–154. ... and although Petit declares this theory false, it is none the less on it and on its data that he bases his system of manufacture of hydrated white zinc, of which he is the inventor that is to say, the saponification of the oil, or the formation of metallic salts, dissolved therein.

External links