File:Ball and socket ground glass joints.svg
Jump to navigation
Jump to search
Size of this PNG preview of this SVG file: 425 × 105 pixels. Other resolutions: 320 × 79 pixels | 640 × 158 pixels | 1,024 × 253 pixels | 1,280 × 316 pixels | 2,560 × 632 pixels.
Original file (SVG file, nominally 425 × 105 pixels, file size: 1 KB)
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 12:41, 15 April 2019 | | 425 × 105 (1 KB) | commons>GKFX | {{Information |description ={{en|1=Drawing of ground glass ball and socket joints used for making laboratory glassware. A ball (inner) joint is shown on the left side and a socket (outer) joint is shown on the right side. The ground glass surfaces are shown with gray shading. By putting them together in the direction of the arrows, they can be joined, usually with a little grease spread on the ground glass surfaces. They are typically held together by a clamp. The ball joint goes in the soc... |
File usage
There are no pages that use this file.
