WikiProjectMed:Internet-in-a-Box/DIY
Jump to navigation
Jump to search

Rpi W Case Top and Bottom for IIAB

IIAB Sticker for Raspberry Pi4 based hardware

A box of #4 3/8 inch screws used to close the smaller version of the box

The devices weight 26 grams (45 grams with the envelope). They are 7 cm by 3.5 cm by 1 cm.
Buy the hardware
You will need:
- Raspberry Pi, we generally use the Zero 2 W (21 CAD) but any version will work.
- 256 GB cards at Amazon for 22 USD. People have built devices using microSD cards as large as 1 Tb. Note: We recommend both the seller and the shipper be Amazon itself, as there are a lot of fake cards out there.
Download the image
- Content empty image file current as May 2023 for w1 (Jun 2024 for w2) -> downloading of content occurs via the admin console
Windows PC
- Run 7-Zip (free download) or any other tool to unzip the disk image file
- Write (not copy) the image to the SD card using Win32 Disk Imager or Etcher.
Possible add ons

- Box for the board to go in (5.95 CAD)(9.95 CAD)
- Sticker for the box (3-D printed version)
- Power supply (micro-B plug)
- Battery from Amazon such as this
- Hardware addons and box designs
- Hardware-based shutdown button
Print your own box

These are the stl files for a case for the raspberry pi 0 W.
-
Tighter fit (both peices)
-
Bottom of the case
-
Top of the case
Other
-
Bottom of the case
-
Top of the case
-
Beekee box case for a Raspberry Pi Zero
-
Beekee box rack for Raspberry Pi Zero