Wheelchair cushion

From WikiProjectMed
Jump to navigation Jump to search

Wheelchair cushions are cushions specifically designed to provide comfort and protection against injury for wheelchair users. They also aid in properly positioning the user in the correct posture.

Wheelchair users are at great risk for pressure sores.[1] A number of factors are included in the formation of these ulcers including:

  1. Insufficient vascularization in areas of high pressure, typically under bony prominences.[2]
  2. The collection of sweat on the skin due to inadequate air flow.[3]
  3. The presence of local areas of elevated temperature.[4]
  4. Shear stresses on the skin.[5]

A number of studies point to interface pressure between the body and the seating surface as the primary contributor to the formation of pressure sores.[1] In response, manufacturers have developed a number of wheelchair seat cushion alternatives. Over 200 models of wheelchair cushions were on the market[where?] as of 2001.[6][needs update]

Characteristics

Various characteristics, combined with a number of cover material options, offer a myriad of possibilities, which can be manipulated to provide various performance properties. These properties are intended to provide the wheelchair user optimal comfort, stability, and postural support, as well as aid in the prevention of pressure ulcers.[6]

The effectiveness of a particular choice of material and design has high variance with respect to a user's medical needs and activities. For instance, if a wheelchair user frequently moves on rough surfaces, gel cushions are less optimal as they are not as effective at absorbing impact.[7]

Sprigle et al. proposed the following criteria for defining and describing cushion characteristics:[6]

Material and construction
  • Cushions using cellular materials – foam (convoluted, segmented), flexible matrix, viscoelastic foam or matrix, nondeforming foam or matrix
  • Cushions containing fluid – viscoelastic fluid, air cushion, water cushion
  • Other construction – solid elastomer and solid gel, cushion with displacing solid elements
Physical characteristics
  • Surface characteristics – unloaded contour depth, loaded contour depth, contour, cut-out, segmented, convoluted foam
  • Features – preischial support, lateral pelvic support, medial thigh support, lateral thigh support
  • Other – bonded, compartment or chamber, stiffness, flat or curved base

Design examples

References

  1. ^ a b Ferrarin, M; Andreoni, G; Pedotti, A (2000). "Comparative biomechanical evaluation of different wheelchair seat cushions". Journal of Rehabilitation Research and Development. 37 (3): 315–24. PMID 10917263.
  2. ^ Kosiak, M (1961). "Etiology of decubitus ulcers". Arch Phys Med Rehabil: 19–29.
  3. ^ Stewart, SFC; Palmieri, V; Cochran, GVB (1980). "Wheel chair cushion effect on skin temperature, heat flux, and relative humidity". Arch Phys Med Rehabil. 61 (5): 229–33. PMID 7377945.
  4. ^ Finestone, HM; Levine, SP; Carlson, GA; Chizinsky, KA; Kett, RL (1991). "Erythema and skin temperature following continuous sitting in spinal cord injured individuals". J Rehabil Res Dev. 28 (4): 27–32. doi:10.1682/JRRD.1991.10.0027. PMID 1941646.
  5. ^ Bennet, L; Kavner, D; Lee, BK; Trainor, FA (1979). "Shear vs . pressure as causitive factors in skin blood occlusion". Arch Phys Med Rehabil. 60: 309–14.
  6. ^ a b c Sprigle, Stephen; Press, Larry; Davis, Kim (2001). "Development of uniform terminology and procedures to describe wheelchair cushion characteristics". J Rehabil Res Dev. 38 (4): 449–61. PMID 11563498.
  7. ^ Fleming, Joe. "Wheelchair Cushion: Selection and Maintenance". Vive Health. Retrieved 6 January 2017.