Talk:Telemark skiing

From WikiProjectMed
Jump to navigation Jump to search

pinhead?

The disambiguation page Pinhead mentions it as a nickname for telemark skiers. No such reference here. I have no clue, but it sounds unlikely to me. Could someone who knows if it isn't true have a look? Tenbergen (talk) 01:12, 25 May 2011 (UTC)[reply]

From personal experience, I know that "pinhead" as a term for a telemark skier was common in 1990's Colorado. --Dcfleck (talk) 20:28, 10 November 2018 (UTC)[reply]

History

It is my understanding that this turn was not "invented" by sondre nordheim, simply brought to the attention of the world skiing community by him. It has been around for far longer right? -- Ochotona (talk) 00:58, 10 April 2009 (UTC)[reply]

Bindings

The section on equiptment has to be cleaned up and the various bindings mentioned. As an example; the current version indicates that all bindings have three pins. I'll try to come back to this soon when time permits.--Swift 19:46, 11 December 2005 (UTC)[reply]


"50% to 60% of the body weight is distributed on the outside ski, depending on snow conditions." makes no sense —Preceding unsigned comment added by 60.242.96.244 (talk) 12:05, 10 September 2009 (UTC)[reply]


G-3 bindings are composed of the next generation technology in the spring pack design of traditional heel spring/toe clamp style bindings. With over a thousand days skiing in the telemark I believe they are the most traditional feeling telemark set up available when used in conjunction with modern skis. —Preceding unsigned comment added by Brentos8150 (talkcontribs) 09:54, 21 August 2010 (UTC)[reply]

The article says: "Oftentimes the heel is attached to the front of the binding by a hinged cable, which holds the ski boot firmly in the binding. These bindings are often non-releasable.[1]" In fact, free heel cable bindings are releasable despite not having a specific release mechanism as with alpine bindings. They release when a fall or extreme turn stretches the cable sufficiently to allow the toe of the boot to become dislodged from the binding. The exception is cable bindings with 3 pins, but even these usually release under heavy torque. ---Dagme (talk) 16:16, 2 December 2017 (UTC)[reply]

Competion Event

I'm watching the Telemark World Cup even in Rjukan, Norway on tv right now, and they called the event "Telemark Sprint". However, unlike what's described in the section in the article, they use the freestyle cross-country-skiing technique.

--Unclevortex 00:39, 15 February 2006 (UTC)[reply]

Weight distribution

I have edited the statements about even weight distribution over both skiis. This is completely wrong. I have skied Telemark for most of my life having grown up in Norway and have recieved instruction from a lot of excellent skiers there. They have all consistently said that the way to ski Telemark is to put your weight on the outer ski. This enable faster, tighter and more powerful turns. I must make it clear that though this is the optimal way to ski Telemark, it is perfectly possible however to use even weight distribution if you are just going for a quiet relaxing ski. My other changes were minor. Cheers --Hugin&Munin 22:16, 9 November 2005 (UTC)[reply]

I'm not sure where the idea that the weight should be put on the outside ski comes from. I am aware that telemark racers do this when skiing gates, but when someone puts too much weight on the lead ski while recreational skiing, it's not usually considered good form. The popular term used in the US for placing too much weight on the lead ski is "fakamarking", recognizing that the trailing ski needs to be engaged in the turn to really obtain the feeling that most enjoy, as well as being able to control the rear ski. With shaped and softer skis, parallel skiing has evolved into more of a two footed technique, and if you wish to carve both the rear and the lead ski in a telemark turn, you just can not leave only 20% of your weight on the back ski.

Notably, in powder, trying to obtain even weighting between skis is important for equal flotation of the skis.

Try to Google telemark weight distribution to find what the consensus on this is. --Johnleeinslc 01:19, 26 March 2006 (UTC)[reply]

  • I also dispute the idea that as a basic notion up to 80% of the skier's weight should be on the outside ski, or that weight on the rear ski should top out at 50%. I also dispute the statement that "turns are led with the heel flat on the outside ski," as some turns can result in slight front heel lift as the skier drives the front of the front boot forward. Others may disagree. So my basic suggestion is this: the description of the basics of the turn in the initial paragraph and the initial paragraph of the "Technique" section should be stripped to the bare minimum (feet staggered fore and aft, trailing heel lifted), and remaining aspects of technique should focus on variances and the debate surrounding them, similar to the treatment of stagger. We should note that technique continues to evolve, particularly in light of recent equipment evolution. Perhaps we could also include a statement that freeheeling more about freedom than rigid formalism?. Freeheel 2:17, 26 September 2006 (PDT)
    Excellent suggestion! --Swift 00:36, 27 September 2006 (UTC)[reply]

Three bin bindings usage

Recently there was the following change in the Telemark#Bindings section:

Bindings hold the Telemark boot to the ski by the toe only. Three-pin bindings are now rarely found i in lift-accessed terrain

Is this to mean that terrain not accessible by means of lifts, has a high number of three-pin bindings? What exactly is a lift-accessible terrain? The slopes that lead down from the lifts, or also areas which skiers might use lifts for some elevation gain?

The phrasing is vague and unless someone improves on it or objects, I will remove it.--Swift 17:48, 27 June 2006 (UTC)[reply]

And now it has been changed to

Bindings hold the Telemark boot to the ski by the toe only. Three-pin bindings are now rarely used for lifted resort skiing

Thanks for the suggestion Shogun, but the clause still sort of implies that three pin bindings are commonly used where there are no lifts in sight. Can anyone corroborate this? If not I'd like to revert it to the sweeping statement that three-pin-bindings are a dying breed, on piste and off. --Swift 03:15, 30 June 2006 (UTC)[reply]

Hinged plate bindings

Hinged plate bindings are becoming more and more popular for telemark skiing. Look at http://www.linken.com/ and http://www.bombertele.com websites. In the article hinged plate bindings are mentioned in connection with alpine touring, which is right, but so are the three-pin and cable bindings. But when you have the ability to lock the heel down, you do not have a telemark binding. Those are called randonnè bindings, and are in general alpine/slalom bindings that you can use for walking. When I was in the USA some people used the term "Freeheel skiing" when they were talking about telemark skiing. This might be a good place to start when writing about the bindings on telemark skis. --hhagelin@gmail.com (sorry for not logging in) 12:33 CET 15 December 2006 —The preceding unsigned comment was added by 84.48.23.17 (talk) 11:34, 15 December 2006 (UTC).[reply]


Hinged plate bindings are becoming more popular? I don't agree. Linken was so UNpopular that it went bankrupt and was bought out. Early problems with balling snow underfoot may have doomed the binding from the start. Bomber Tele is a boutique binding with a small but loyal following. Johnleeinslc (talk) 01:40, 15 February 2008 (UTC)[reply]

Photos

I think better photos could be found for this article. At the moment neither of them do much to show the particulars of telemark skiing. The photos should be taken at such an angle to distinctly show the loose heel. I'm not even sure if a picture in powder is necessary, unless if it also shows the telemark style clearly. Icemuon 11:31, 31 January 2007 (UTC)[reply]

Were it not for powder skiing,it would be hard to imagine a telemark resurgence. Powder skiing ought to be represented in the photos since it represents such a large reason for telemark skiings popularity. johnleeinslc 16 August, 2007

Wax

I'm fairly certain that Telemark skis require some type of wax(es). Anyone care to address this topic? Fuzzform (talk) 06:42, 6 October 2009 (UTC)[reply]

  • Waxing is the same as for alpine skis (meaning in my case I ought to wax my skis more, but often I go without), unless you are talking about touring skis with waxless (fish scale) bases, which are used for ascending without skins. Those don't take regular alpine ski wax. IIRC "glide liquid" (may be a Swix TM) is available for waxless bases; I think it's targeted for cross-country skis, but I bet you could use it on anything. This leads me to think that some discussion of touring skis, skins, and going uphill might be appropriate for this article Freeheel 171.68.18.54 (talk) 01:15, 9 October 2009 (UTC)[reply]

Yes, But...

...what is it? There's a little information about the history of Telemark skiing, but that's all. As a non-skier, I find myself not noticeably better-informed than I was before I read the article. I think it would be good if someone who actually knows about the style/technique wrote a more descriptive article, including what makes it unique, and perhaps a discussion of advantages and disadvantages.

*Septegram*Talk*Contributions* 15:04, 10 September 2015 (UTC)[reply]